Home Page | Product
These micro switches work well for both homing and movement limiting switches.
Micro Limit Switch Kit contains:
NOTE: The holes in the plastic of the switch will need to be tapped to M3 size so the included M3 Screws can be used to attach the switch to your project.
Nema 23 motors are power houses when it comes to larger machines that need the extra torque. This motor can be used on all sorts of projects that require a strong motor.
Wire pinout : A+ Black, A- Green, B+ Red, B- Blue
These micro switches work well for both homing and movement limiting switches. Also available in a kit.
Everything is included so this motor is ready to rock when you get it!
The CNC xPRO is designed to run the opensource gcode interpreter GRBL, opensource programming environment Arduino, or anything you can write in AVR studio. The xPRO comes pre-flashed with GRBL so all you need to do is wire up your motors!
From the computer side we have found that Universal-G-Code-Sender works extremely well (open source / free download).
Spark’s recommended software stack is:
Most of these are opensource!
This ultra low profile Power Supply delivers 24 Volts with 14.6 Amps. This is the ideal Power Supply for most electronic setups.
“This Power Supply will super heat a 3D printer’s extruder and heated bed swiftly with plenty of power to spare”
Pro-tip: You can easily mount this unit using Single L Brackets and M4 Socket Head Cap Screws.
The fan is temperature controlled. It only turns on when the PSU internals heat up above 50degC and then turns back off once the internals fall below 40degC again.
Warning – Be sure to disconnect power before attempting to to switch voltage. Power Supply should always be unplugged while you make the connections and also make sure the shield is in place before plugging the cord into an outlet.
Warning – high voltage! Always have a qualified electrician connect this unit. Use at your own risk!
Copyright CNC Kits 2014
CNC Kits - parts for makers All prices in NZD and include GST