V-Slot ACME Nut Plate$12.86 incl. GST
This V-Slot Acme Nut Plate is a perfect fit for any integrated acme screw transmission project. It can fit into the hollow inserts of 20×40, 20×60 or 20×80 V-Slot.
You can use self tapping screws to mount these into the end holes of V-Slot.
This is a standard non-adjustable version of the nut blocks and so cannot take out any play or backlash in the system. These style nut blocks are designed more for a system where higher precision and repeat-ability is not a necessity. If you are looking for a higher precision nut block, check out the Anti-Backlash Nut Block
- Pitch: 2mm
- No of starts: 4
- Lead: 8mm
- Material: Delrin
Use in conjunction with the 8mm Metric Lead Screw.
NOTE: The nut block can be very tight to ensure that there is little play. So you may need to ‘seat’ the nut block so that it run smoothly.
In stock (can be backordered)