Xtreme Solid V Wheel™ Kit
$14.29 incl. GSTThe OpenBuilds Xtreme Solid V Wheel is part of the heavy duty Xtreme line of OpenBuilds parts, designed with strength in mind.
The Solid V Xtreme Wheel is made from very hard polycarbonate (clear) material which, due to its strong nature, will resist compression and wear and, in turn, leads to better over all precision and strength for your builds.
The Xtreme V wheels are designed to be used as a heavy duty alternative to the Delrin V Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin V Wheels work great for most light load applications the OpenBuilds Xtreme Solid V wheels can be used for builds where heavier loads are required and less compression in the delrin is desired.
The OpenBuilds Team have tested these wheels at 25lbs. per wheel with no noticeable deflection. Beta testing resulted in unofficial results of 55lb.s per wheel! Many of these wheels could be added to a gantry to allow an even distribution of the load across them.
These wheels are individually milled for consistent high precision and tolerance.
Part details:
- Material – Polycarbonate (clear)
- Dimensions 24.39 OD x 15.974 +/- 0.026 ID x 10.23 ‘thick’
- Rockwell Hardness M 75
- Compressive Strength 86Mpa
Xtreme Solid V Wheel Kit contains:
- 1 x Xtreme Solid V Wheel
- 2 x Ball Bearings – 625 2RS
- 2 x Precision Shim
- 1 x Lock Nut with Nylon Insert
Don’t forget to add screws and spacers to your order!
- M5 Low Profile Screw (25mm for use with 1/8″ Plate and 30mm for 1/4″ Plates)
- Aluminum Spacers (choose between 6mm and 1/4″)
- Eccentric Spacers (choose between 6mm and 1/4″)
Note: Usually for a standard gantry plate you will need two Eccentric Spacers as well as two Aluminum Spacers
IMPORTANT Only use silicone for lubrication on these polycarbonate wheels if needed. DO NOT use synthetic lubricating oils or cutting oils.
In stock (can be backordered)