Open your wheel kit and check that all the parts are present. Each wheel kit comes with 1 x wheel cover, 2 x bearings, 2 x precision shims and 1 x nyloc. We are using the Xtreme Solid-V wheel kit.
Install one bearing into one side of the wheel.
Insert the precision shim between the two bearings. This shim allows you to tighten down the bolt while maintaining the correct spacing between the wheels.
Install the second bearing.
Drop the wheel onto its mounting screw. Add the correct spacer to provide the clearance needed.
Add the wheel to the surface it will be mounted to and lock off with a nyloc or spring washer and standard nut.