V-Slot is a high quality 6063 T-5 Aluminum Extrusion building block that has an extremely smooth linear v groove rail on all 4 sides. It's precise, easy to work with and allows you unlimited design control through it's modular nature. These sleek silver V-Slot sticks have a super smooth, clear anodized finish, which allows for a smoother ride for the Dual V Wheels.

Building with V-Slot Linear Rail is much like working with lumber.  You can cut it with a chop saw and the rest is as simple as turning a screwdriver to make the connections.

Product details:

• 6063 T-5 Aluminum Extrusion
• Silver with clear anodized finish
• Available in 250mm, 500mm, 1000mm and 1500mm lengths
• Openbuilds product

What Can Be Made Using OpenBuilds V-Slot®?

You will find that V-Slot® Linear Rail is the perfect solution for most projects. Below is a list of a few ideas to get you started.

• 3D Printers
• CNC Engravers
• Hot Wire Machines
• Laser Cutters
• Camera Sliders
• Plasma Cutters
• Robotics
• Furniture
• & much, much more!

V-Slot is a high quality 6063 T-5 Aluminum Extrusion building block that has an extremely smooth linear v groove rail on all 4 sides. It's precise, easy to work with and allows you unlimited design control through it's modular nature. These sleek silver V-Slot sticks have a super smooth, clear anodized finish, which allows for a smoother ride for the Dual V Wheels.

Building with V-Slot Linear Rail is much like working with lumber.  You can cut it with a chop saw and the rest is as simple as turning a screwdriver to make the connections.

Product details:

• 6063 T-5 Aluminum Extrusion
• Silver with clear anodized finish
• Available in 250mm, 500mm, 1000mm and 1500mm lengths
• Openbuilds product

What Can Be Made Using OpenBuilds V-Slot®?

You will find that V-Slot® Linear Rail is the perfect solution for most projects. Below is a list of a few ideas to get you started.

• 3D Printers
• CNC Engravers
• Hot Wire Machines
• Laser Cutters
• Camera Sliders
• Plasma Cutters
• Robotics
• Furniture
• & much, much more!

V-Slot is a high quality 6063 T-5 Aluminum Extrusion building block that has an extremely smooth linear v groove rail on all 4 sides. It's precise, easy to work with and allows you unlimited design control through it's modular nature. These sleek silver V-Slot sticks have a super smooth, clear anodized finish, which allows for a smoother ride for the Dual V Wheels.

Building with V-Slot Linear Rail is much like working with lumber.  You can cut it with a chop saw and the rest is as simple as turning a screwdriver to make the connections.

Product details:

• 6063 T-5 Aluminum Extrusion
• Silver with clear anodized finish
• Available in 250mm, 500mm, 1000mm and 1500mm lengths
• Openbuilds product

What Can Be Made Using OpenBuilds V-Slot®?

You will find that V-Slot® Linear Rail is the perfect solution for most projects. Below is a list of a few ideas to get you started.

• 3D Printers
• CNC Engravers
• Hot Wire Machines
• Laser Cutters
• Camera Sliders
• Plasma Cutters
• Robotics
• Furniture
• & much, much more!

Openbuilds C-Beam™ is a profile based on the V-Slot linear guide system. It incorporates a C shape profile which gives added strength and functionality. C-Beam™ is considered to be a 40mm x 80mm profile and as it is a product of the V-Slot line, all standard V-Slot parts and accessories are compatible.

C-Beam™ in available in 250mm, 500mm, 1000mm and 1500mm lengths and comes pre-tapped with 4 holes ready for C-Beam™ end mounts. This allows you to quickly create C-Beam™ linear actuators. Multiple plates can be added for prevision and strength.

C-Beam™ is a 6063 T-5 Aluminum Extrusion building block that has an extremely smooth linear v groove rail on all 4 sides. It's precise, easy to work with and allows you unlimited design control through it's modular nature. With a super smooth, clear anodized finish, making them much shinier than a standard T-Slot extrusion, the finish allows for a smoother ride for the OpenBuilds Delrin V Wheels.

Product details:

• 6063 T-5 Aluminum Extrusion
• 40mm x 80mm profile
• Silver with clear anodized finish
• Available in 250mm, 500mm, 1000mm and 1500mm lengths
• Openbuilds product

Openbuilds C-Beam™ is a profile based on the V-Slot linear guide system. It incorporates a C shape profile which gives added strength and functionality. C-Beam™ is considered to be a 40mm x 80mm profile and as it is a product of the V-Slot line, all standard V-Slot parts and accessories are compatible.

C-Beam™ in available in 250mm, 500mm, 1000mm and 1500mm lengths and comes pre-tapped with 4 holes ready for C-Beam™ end mounts. This allows you to quickly create C-Beam™ linear actuators. Multiple plates can be added for prevision and strength.

C-Beam™ is a 6063 T-5 Aluminum Extrusion building block that has an extremely smooth linear v groove rail on all 4 sides. It's precise, easy to work with and allows you unlimited design control through it's modular nature. With a super smooth, clear anodized finish, making them much shinier than a standard T-Slot extrusion, the finish allows for a smoother ride for the OpenBuilds Delrin V Wheels.

Product details:

• 6063 T-5 Aluminum Extrusion
• 40mm x 80mm profile
• Silver with clear anodized finish
• Available in 250mm, 500mm, 1000mm and 1500mm lengths
• Openbuilds product

Openbuilds C-Beam™ is a profile based on the V-Slot linear guide system. It incorporates a C shape profile which gives added strength and functionality. C-Beam™ is considered to be a 40mm x 80mm profile and as it is a product of the V-Slot line, all standard V-Slot parts and accessories are compatible.

C-Beam™ in available in 250mm, 500mm, 1000mm and 1500mm lengths and comes pre-tapped with 4 holes ready for C-Beam™ end mounts. This allows you to quickly create C-Beam™ linear actuators. Multiple plates can be added for prevision and strength.

C-Beam™ is a 6063 T-5 Aluminum Extrusion building block that has an extremely smooth linear v groove rail on all 4 sides. It's precise, easy to work with and allows you unlimited design control through it's modular nature. With a super smooth, clear anodized finish, making them much shinier than a standard T-Slot extrusion, the finish allows for a smoother ride for the OpenBuilds Delrin V Wheels.

Product details:

• 6063 T-5 Aluminum Extrusion
• 40mm x 80mm profile
• Silver with clear anodized finish
• Available in 250mm, 500mm, 1000mm and 1500mm lengths
• Openbuilds product

The OpenBuilds Xtreme Solid V Wheel is part of the heavy duty Xtreme line of OpenBuilds parts, designed with strength in mind.

The Solid V Xtreme Wheel  is made from very hard polycarbonate (clear) material which, due to its strong nature, will resist compression and wear and, in turn, leads to better over all precision and strength for your builds.

The Xtreme V wheels are designed to be used as a heavy duty alternative to the Delrin V Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin V Wheels work great for most light load applications the OpenBuilds Xtreme Solid V wheels can be used for builds where heavier loads are required and less compression in the delrin is desired.

The OpenBuilds Team have tested these wheels at 25lbs. per wheel with no noticeable deflection.  Beta testing resulted in unofficial results of 55lb.s per wheel!  Many of these wheels could be added to a gantry to allow an even distribution of the load across them.

These wheels are individually milled for consistent high precision and tolerance.

Part details:

• Material - Polycarbonate (clear)
• Dimensions 24.39 OD x 15.974 +/- 0.026 ID x 10.23 'thick'
• Rockwell Hardness M 75
• Compressive Strength 86Mpa

Xtreme Solid V Wheel Kit contains:

• 1 x Xtreme Solid V Wheel
• 2 x Ball Bearings - 625 2RS
• 2 x Precision Shim
• 1 x Lock Nut with Nylon Insert

Don't  forget to add screws and spacers to your order!

• M5 Low Profile Screw (25mm for use with 1/8" Plate and 30mm for 1/4" Plates)
• Aluminum Spacers (choose between 6mm and 1/4")
• Eccentric Spacers (choose between 6mm and 1/4")

Note: Usually for a standard gantry plate you will need two Eccentric Spacers as well as two Aluminum Spacers

IMPORTANT Only use silicone for lubrication on these polycarbonate wheels if needed.  DO NOT use synthetic lubricating oils or cutting oils.

These bearings can be used with the Threaded Rod Plate and 8mm ACME rod.

Product details:

• ABEC 1
• RPM rating 5000-6000
• Dynamic load rating Cr: 590 N
• Static load rating Cor: 1260 N
• Bore: 8mm
• OD: 16mm
• Width: 5mm
• Chrome Steel
• Color: Silver
• Openbuilds product

90 degree angle corner connector, milled with precision from solid aluminum

Product details:

• Milled from solid aluminum
• Black anodized
• Fits on 20mm V-Slot profile extrusion systems
• Openbuilds product

Mount with M5 x 8mm Low Profile Screws and Tee Nuts

These 90 degree cast corner blocks (with a 4mm wide T-slot tab) and are used to connect V-Slot or 20 Series T-slot aluminum extrusions together for a 90 degree connection.

Product Details:

• Dimensions: 20mm x 20mm x 17mm
• 4mm Wide T-Slot Tab
• Compatible with 20mm V-Slot Linear Rail
• Cast Aluminum
• Color: Silver
• Openbuilds product

Pro-Tip: The Cast Corner Brackets have stand off teeth (great for locking into the slot).  When mounted in this direction you would utilise an 8mm low profile screws and an M5 Tee Nuts.  If you need to use the Cast Corners perpendicular to the V-Slot Linear Rail you can either flip the M5 Tee Nuts upside down in the track of the V-Slot Linear Rail (this will ensure that the screw will grab the threads of the M5 Tee Nuts) or you can sand the tabs off the bottom of the Corner Connector.

This versatile Universal L Bracket is designed to work with many different V-Slot and T-Slot extrusions. This handy L Bracket is very useful when building machines or joining two T-slot aluminum extrusions for any reason.

Product Details:

• 20x20x27mm
• M5 Mounting Hole
• Cast Aluminum
• Color: Silver
• Openbuilds product

NOTE: Mount this corner to V-Slot using M5 x 8mm screw and M5 T-Nuts

This precision trapezoidal (metric) lead screws pitch and diameter are a perfect combination of high torque and speed. This screw fits the bill for most machine designs. and is equipped with a large diameter that helps eliminate whipping. A high pitch allows quick movement at 8mm per revolution. It's a great power transition choice for your next build.

Part details:

• No. of starts: 4
• Pitch: 2mm
• Lead: 8mm
• Various lengths available (Actual lengths have been extended to allow for different connection points)
  • 250mm (actual length 290mm)
  • 500mm (actual length 540mm)
  • 1000mm (actual length 1040mm)

Use with the V-Slot Nut Plate and Nut Block 

An example steps settings for your control software would be 200 steps per millimeter if you are running the common 1.8 degree steppers and your stepper driver is set to 1/8 step mode. To calculate different step scenarios for your control software, have a look at these handy steps calculators!

Common setup example:

NOTE: Because this lead has 4 starts with 2mm pitch between each this means the pitch will be 8. So 8 is what you would use for the pitch setting in the steps calculators.

This precision trapezoidal (metric) lead screws pitch and diameter are a perfect combination of high torque and speed. This screw fits the bill for most machine designs. and is equipped with a large diameter that helps eliminate whipping. A high pitch allows quick movement at 8mm per revolution. It's a great power transition choice for your next build.

Part details:

• No. of starts: 4
• Pitch: 2mm
• Lead: 8mm
• Various lengths available (Actual lengths have been extended to allow for different connection points)
  • 250mm (actual length 290mm)
  • 500mm (actual length 540mm)
  • 1000mm (actual length 1040mm)

Use with the V-Slot Nut Plate and Nut Block 

An example steps settings for your control software would be 200 steps per millimeter if you are running the common 1.8 degree steppers and your stepper driver is set to 1/8 step mode. To calculate different step scenarios for your control software, have a look at these handy steps calculators!

Common setup example:

NOTE: Because this lead has 4 starts with 2mm pitch between each this means the pitch will be 8. So 8 is what you would use for the pitch setting in the steps calculators.

This precision trapezoidal (metric) lead screws pitch and diameter are a perfect combination of high torque and speed. This screw fits the bill for most machine designs. and is equipped with a large diameter that helps eliminate whipping. A high pitch allows quick movement at 8mm per revolution. It's a great power transition choice for your next build.

Part details:

• No. of starts: 4
• Pitch: 2mm
• Lead: 8mm
• Various lengths available (Actual lengths have been extended to allow for different connection points)
  • 250mm (actual length 290mm)
  • 500mm (actual length 540mm)
  • 1000mm (actual length 1040mm)

Use with the V-Slot Nut Plate and Nut Block 

An example steps settings for your control software would be 200 steps per millimeter if you are running the common 1.8 degree steppers and your stepper driver is set to 1/8 step mode. To calculate different step scenarios for your control software, have a look at these handy steps calculators!

Common setup example:

NOTE: Because this lead has 4 starts with 2mm pitch between each this means the pitch will be 8. So 8 is what you would use for the pitch setting in the steps calculators.

Eccentric Spacers are the perfect solution for creating a pre-load from the V-Wheels to the V-Slot rail. They are added to one side of a set of wheels on a gantry plate.

The eccentrics give an approx 0.79mm adjustment range to allow for a very strong and secure connection between the V-Slot linear rail and wheel.  A 10mm flange allows for a very sturdy base for a stable wheel mount. These Eccentric Spacers come with a divot on the outside which allows you to know at all times where the smallest part of the cam hole is.

Product details:

• Stainless steel
• 8mm cam size
• 6mm - 1/4" cam height
• Rim fits into a 7.12mm hole
• 5mm Bore
• Fits both full size & mini wheels
• Openbuilds product

Adjustments are made with an 8mm wrench.

This high quality aluminum flexible coupling can be used to connect your stepper motor to your lead screw and the flexibility will help with any misalignment issues.

Please select required shaft size from dropdown menu.

Part details:

• Material:  Aluminum
• Length: 25mm (0.98")
• Outer Diameter: 20mm (0.79")
• Various shaft sizes available.

NOTE: Please make sure that the coupling is tightened all the way down. With diameter tolerances you may find these couplings grab at the end of the adjustment limit. So, really give them a good tightening to ensure they grab.

This 8mm Acme Nut Block is a great choice for many projects requiring Acme linear motion. It serves dual purpose in that it can be mounted to the bottom of a 3mm/1/8" plate, utilizing M5 nylon insert nuts and 15mm M5 screws, or it can also be mounted directly to V-Slot utilising two channels with 15mm M5 low profile screws and two tee nuts.  These mounting choices allow for a host of modular machine applications.  You can mount hit block along any length of V-Slot to create your linear motion.

Part details:

• Pitch: 2mm
• No of starts: 4
• Lead: 8mm
• Material: Delrin
• Use in conjunction with the 8mm Metric Lead Screw

This high quality 8mm Acme Anti-Backlash Nut Block is a great choice for many projects requiring lead screw linear motion. The pitch and diameter are a perfect combination of high torque and speed. This screw fits the bill for most machine designs and has quickly become a standard on OpenBuilds builders.

It serves more than one purpose in that it can be mounted to the bottom of a 3mm or 1/8" plate utilizing M5 nyloc nuts and M5 x 15mm screws or can also be mounted directly to V-Slot utilizing two channels with two M5 x 15mm screws and two tee nuts.  These mounting choices allow for a host of modular machine applications.  You can mount this block along any length of V-Slot to create your linear motion.

To use the the Anti-Backlash Nut Block - Turn the set screw just enough to take out any play in the Nut Block. Then screw the lock nut on the top of the set screw to lock the set screw in place.

Part Details:

• Tr8 x 8(p2) Metric Acme Tap
• Pitch is 2mm
• Starts is 4
• Lead is 8mm
• Mounting hole spacing 20mm
• Material: Delrin

Includes:

• 1 x Set screw
• 1 x Low profile locking nut
• 1 x Anti-backlash Nut Block

Use in conjunction with the 8mm Lead Screw

• Inside Dia 5mm, Outside Dia 0.50", Width 0.75"
• Steel with black oxide finish

• Inside Dia 8mm, Outside Dia 14mm, Width 7mm
• Steel with black oxide finish

• Inside Dia 0.25", Outside Dia 0.50", Width 0.750"
• Steel with black oxide finish

OpenBuilds M5 Tee Nuts are designed and custom made with angled corners to allow for a smooth transition when sliding into V-Slot and C-Beam.  OpenBuilds Tee Nuts are reversible.  You can flip them upside down if you need more threading.

Product details:

• M5 Thread Size
• Mounts with M5 4mm Set Screws
• Compatible with 10mm Size Slot (V-Slot Linear Rails)
• Shiny Nickel Plated Steel
• Color: Silver

These heavy duty mounting plates are perfect for any project requiring connection strength.

Part details:

The C-Beam™ End Mounts are high quality aluminum plates with multiple taps and recessing to ensure easy assembly of the C-Beam™ Linear Actuator.

Part details:

• 6061 - T5 Plate
• 12mm Thick
• Recessed screw pockets ensure flush mounts
• Pre-tapped mounting holes for easily mounting a Nema 23 Stepper Motor 
• Recessed bearing pocket ensures a stable fit for lead screw bearing
• Use in conjunction with Low Profile Screws M5x20mm (sold separately)
• Anodized Aluminum
• Color: Black
• Openbuilds product

A simple plate that can be used on every axis creating a one plate does it all system! The XLarge C-Beam™ Gantry Plate was designed to be super strong universal gantry solution.

Part details:

• 6060 - T5 Plate
• 6mm thick
• Mates at 90 degrees to another plate allowing for the best in an XY and Z system
• Recessed screw pockets ensure flush mounts
• Pre-Tapped mounting holes for a clean 90 degree mounting solution
• Adjustable end holes allow for creating a very accurate and reliable double Nut Block system
• Center recess allows for single nut block mounting
• Up to 6 wheel mounting configuration for secure and precise rail lock in
• The wide wheel spread along the axis makes for a very sturdy axis
• Anodized Aluminum
• Color: Black
• Openbuilds product

These low profile screws are a great choice for any project! Compared to most screws, they are ultra low profile, which means plenty of clearance and the low profile head will not get in the way when building.

Product details:

• Head thickness: 1.5mm
• Thread size:  M5
• Thread Pitch: 0.8mm
• Hex 3mm
• Alloy Steel
• Color: Black

These low profile screws are a great choice for any project! Compared to most screws, they are ultra low profile, which means plenty of clearance and the low profile head will not get in the way when building.

Product details:

• Head thickness: 1.5mm
• Thread size:  M5
• Thread Pitch: 0.8mm
• Hex 3mm
• Alloy Steel
• Color: Black

These low profile screws are a great choice for any project! Compared to most screws, they are ultra low profile, which means plenty of clearance and the low profile head will not get in the way when building.

Product details:

• Head thickness: 1.5mm
• Thread size:  M5
• Thread Pitch: 0.8mm
• Hex 3mm
• Alloy Steel
• Color: Black

These low profile screws are a great choice for any project! Compared to most screws, they are ultra low profile, which means plenty of clearance and the low profile head will not get in the way when building.

Product details:

• Head thickness: 1.5mm
• Thread size:  M5
• Thread Pitch: 0.8mm
• Hex 3mm
• Alloy Steel
• Color: Black

These low profile screws are a great choice for any project! Compared to most screws, they are ultra low profile, which means plenty of clearance and the low profile head will not get in the way when building.

Product details:

• Head thickness: 1.5mm
• Thread size:  M5
• Thread Pitch: 0.8mm
• Hex 3mm
• Alloy Steel
• Color: Black

These low profile screws are a great choice for any project! Compared to most screws, they are ultra low profile, which means plenty of clearance and the low profile head will not get in the way when building.

Product details:

• Head thickness: 1.5mm
• Thread size:  M5
• Thread Pitch: 0.8mm
• Hex 3mm
• Alloy Steel
• Color: Black

These low profile screws are a great choice for any project! Compared to most screws, they are ultra low profile, which means plenty of clearance and the low profile head will not get in the way when building.

Product details:

• Head thickness: 1.5mm
• Thread size:  M5
• Thread Pitch: 0.8mm
• Hex 3mm
• Alloy Steel
• Color: Black

These low profile screws are a great choice for any project! Compared to most screws, they are ultra low profile, which means plenty of clearance and the low profile head will not get in the way when building.

Product details:

• Head thickness: 1.5mm
• Thread size:  M5
• Thread Pitch: 0.8mm
• Hex 3mm
• Alloy Steel
• Color: Black