Delrin Mini V Wheel™ Kit$8.36 incl. GST
These Delrin Mini V Wheels can be used on a variety of projects and are great for use with any V-Slot extrusion.
These wheels are individually milled for consistent high precision and tolerance.
- Material – Delrin
- Dimension 15.23 OD x 9.974 +/- 0.026 ID x 8.8 thick
- Rockwell Hardness M80
- Compressive Strength 63MPA
Delrin Mini V Kit contains:
Don’t forget to grab screws and spacers too!
- Low Profile Screw (25mm for use with 1/8″ Plate and 30mm for 1/4″ Plates with the exception of the C-Beam Gantry Plate & Mini V Plate which uses 25mm)
- Aluminum Spacers (choose between 6mm and 1/4″)
- Eccentric Spacers (choose between 6mm and 1/4″)
Note: Usually for a standard gantry plate you will need two Eccentric Spacers as well as two Aluminum Spacers
In stock (can be backordered)